English 中文
  Home About Us New Product Products Project Exhibition Contact Us
  Wood Cabinet
  Sink & Bowl
  Sanitary Ware
  Faucet / Tap
  Construction & Gar...
  Monument series

Countertops & Wood Cabinets

It would be our great honor if we could introduce some specifications of our countertops to you as following:


1.      Vanity tops:

a.       Main Types: (a). single/double bowl standard vanity; (b). bowed vanity; (c). Banjo vanity; (d). customer-made vanity for cabinets, etc. We are offering a drawing for some these standard vanities—please see attachment. If you need other designs, you could send us sketches, according to which we would make standard CAD drawings. (P.S. There are 7 professional technicians of AUTO CAD in our office)


b.      Especially, for the cutout of undermount sinks, usually we would drill 4 anchor holes underneath, and the inserts would be pre-glued. It is very convenient for customers to install the ceramic bowls by themselves. (Attached please kindly find installation picture for ceramic bowls)



2.      Kitchen tops: it is much more complicated to produce, and there are points as following that we would pay attention to when producing:

a.       Color Matching: Usually one set of kitchen top is made of several jointed main boards, island top and bar. So color matching for the whole set is very important. Before cutting blocks, our workers would compare the colors for the first time; after polishing slabs, we would do the color matching again. Even for the troublesome color like Golden Peach (G682) or Tiger Skin Yellow, we could make the jointed parts of the same color, and make those not jointed but placed in one room meet with color-matching standard of American market.


b.      Joint and Thickness Calibration: attached there is a picture of joint seam. As you could see, we could make the jointed pieces the same thickness and be jointed perfectly. At the same time when we inspect color matching, we would strictly check the thickness. If two pieces’ thicknesses differ obviously, then we would planish till they fit.

c.       Sink cutout: usually two kinds—undermount cutout and drop-in cutout. Undermount cutout’s edge need to be polished. And we usually insert steel bars beside cutouts to reinforce—please see attachment. Drop-in cutout’s edge doesn’t need to be polished, and usually in order not to get broken during transportation, our customers would ask us to just core & score the drop-in cutout, i.e. drilling through cutout’s four corners and leaving 1cm-deep groove for the cutout line—please see the attachment—so that our customers could knock down this cutout piece easily at job site.



3.      Wood Cabinet: Given that many projects in USA have the demand of stone top and wood cabinet at the same time , we have also found some good wood cabinet processing factories and maked investments by sending capital there. Thus, to the projects requiring wood cabinets, hotel projects in particular, we can deliver the stone tops and finished wood cabinets in the same cotainer. It saves the room of the containers and freight, what’s more, it also enables the customers to avoid picking up the goods in serveal times and reduce the damage risks.Attached please check the photos of our wood cabinet processing factory.


4.      Accessories: in order to save the trouble for our customers to search fittings from other suppliers, and also for purpose of well fittings with our tops, we would provide different kinds of accessories, like ceramic bowl, stainless steel sinks and faucet. Though these accessories are not produced by ourselves, for many years’ cooperation, we could entrust our cooperating factories to help to produce. They would be shipped out together with our stone products. And their prices would also be much cheaper than market price. So many of our American customers prefer to buy them from us.

a.       Ceramic Bowls: for undermount bowls, American standard 19”x16”x8” is the most common one. Besides, we could also help to provide HC Bowl (6” deep), Corner Bowl, Pedestal Bowl, etc. We are also attaching a picture of standard bowl with carton packing. Please see attachment.

Stainless Steel Sink: The size and type are as per customers’ requirement. For American market usually the steel is #304, and thickness is 18 gauge. There are two common undermount sinks: equal-bowls (popular model DB560A w/size of 30.5"x17.5") and big/small-bowl (popular model D3120 w/size of 33.5”x22.5”). Attached are some pictures for your reference.


c.       Faucet: there are many models. If you need, we would send you price list. Please kindly note that most of our faucets to America have been de-leaded, and the screw threads is up to the American standard. So please do not worry that you couldn’t find replacing fittings in America.


5.      Package:

a.       For the convenience of installation in working sites, we would attach labels on each main board before we packing, indicating which unit/drawing/size it belongs to—please see the attachment. As to the products for big projects, we would pack as per floors or units, so that with our detailed packing list, our customers could find the right products correctly and quickly.


b.      To avoid breakage by jounce in ocean transportation, we would use iron wires to fix the crates into containers. Attached please kindly find pictures for common packing and reinforced packing and over-long packing.


c.       Sometimes some urgent products need to be delivered by air, we would use the strongest way of packing, to insure our products wouldn’t get broken during loading and unloading. The fee for such special package would be $2/m2 extra.


Sincerely we wish to communicate and cooperate with you. Thank you!


Best Regards

Zhou Aimin

General Manager of
14th Floor, Zhongfu Building 92# East Street Fuzhou, China  350001

ADD: 14th floor,Zhongfu Building. 92#East Street,Fuzhou,China PC:350001
Tel: 86-591-87503305 Fax: 86-591-87503360 FZWEB
E-Mail:lm@liminstone.com Web: http://www.liminstone.com